Centrifugal Blower Forward - Didw

Centrifugal Forward Curved Fans/Blowers consist of Double Inlet Double Width (DIDW) and Single Inlet and Single Width (SISW) configuration. These fans have forward curved impellers with forward curved blades having special profile to give you maximum efficiency at low noise levels. These impellers are statically and dynamically balanced. The fans are suitable for various applications where high volume air displacement is required like air cooling, general ventilation, pressurization, etc., in various commercial processes and various industrial HVAC systems.

Centrifugal Blower Backward - Sisw

Centrifugal Backward Curved Fans/Blowers consist of Double Inlet Double Width(DIDW) and Single Inlet and Single Width (SISW) configuration. These fans have backward curved impellers with backward curved blades having special profile to give you maximum efficiency at low noise levels. These impellers are statically and dynamically balanced. The fans are suitable for various applications where high volume air displacement is required like air cooling, general ventilation, pressurization, etc., in various commercial processes and various industrial HVAC systems like Power Plants, Mine Ventilations , Marine Ventilations etc.

Centrifugal Blower Backward - Didw

Axial Flow Fan - Normal

An Axial Flow Fan draws the air into it and discharge it in the same axial direction, rotating in a round section of duct, to exhaust hot and/or contaminated air from a process or system. They can be direct driven with the impeller mounted directly on the motor shaft or can be built driven with the impeller mounted on a separate fan shaft and driven by the motor through bells and sheaves.

Axial Flow Fan - Fire Rated

An Axial Flow Fan draws the air into it and discharge it in the same axial direction, rotating in a round section of duct, to exhaust hot and/or contaminated air from a process or system. They can be direct driven with the impeller mounted directly on the motor shaft or can be built driven with the impeller mounted on a separate fan shaft and driven by the motor through bells and sheaves.

Air Washer

Available with two types i.e. Single Skin and Double Skin.The corner sheet metal is of cast iron with no insulation while double skin has PVC with Puf insulation that´s CFC free. Working Principle. A natural and energy-efficient means of cooling can be provided by evaporating water into air, specially, in low-humidity areas. This very principal is used in the evaporative coolers, i.e. cooling outdoor air by passing it over water-saturated pads, causing the water to evaporate into it. The cooler air is then directed into the required space, and pushes warmer air out through the given vents. While its operation, vents are opened part way to allow warm indoor air to escape as it is replaced by cooled air. In contrast to central air conditioning systems that recirculate the same air; evaporative coolers provide a steady stream of fresh air into the required space. Evaporative coolers cost about one-half as much to install as central air conditioners and use about one-quarter as much energy.

Roof Extractor

The Roof Extractor is a motor driven fan unit having cast aluminum alloy impeller, aero foil section blades and is provided with durable weather proof exhaust cowl.

Bifurcated Fan

Bifurcated Axial Fans are used to keep the motor out of air stream because of the high air/gas/fumes temperatures. They are direct driven axial fans where the motor is encased in a central pod to isolate from the flow of air.

Jet Fan

Induced Jet Fan is a special designed fan to achieve high impulse throw of discharging air. It consists of an attenuator at the suction and discharge site, pre-designed inlet and outlet guide vanes. The fan units are of high efficiency. All Jet Fans are built with the high quality assurance and verified using advanced test equipment.

Cellulose Pad Vapur+

Good maintenance practices preserve the pad and keep the water delivery system in proper working condition. The cellulose pad cooling system draws outside air through wet vertical pads. The major components of this system are: pad media, water supply, pump, distribution pipe, etc. Some of the moisture evaporates into the air stream, as air flows past the moist pad surfaces. Heat is withdrawn from the air during this process and the air leaves the pad at a lower temperature with higher moisture content.

Plug Fan

High efficient Plug Fans, with backwardly inclined curved wheels are designed for clean air applications or for moist air systems. The plug fan eliminates the need for connecting ductwork. Its mounting panel permits assembled-unit installation to any well-supported plenum wall.

Dry Scrubber

A highly efficient, engineered solution for reduction in smoke, Grease, Odor from the extract of kitchens and restaurants through a Scrubber which operates on the principle of electrostatic precipitation. It pulls the air through the kitchen hoods and duct into a Dry Scrubber where the fumes are treated before they are exhausted or released into the atmosphere. The Kitchen Fumes are drawn from hood through duct and enter the scrubber and enter the scrubber and flow horizontally. is used for commercial kitchen ventilation, Industrial Ventilation, Fume Extraction systems, and PM2.5 Management. It is used in healthcare, pharma, medical, food products, kitchen exhaust, aerospace, photographic processing, power plants, nuclear fuel processing, etc.

Tunnel Fan

Tunnel Fans are axial flow fans and move an airstream along the fan's axis. The air is pressurized by the aerodynamic lift generated by the fan blades, made like a propeller or an airplane wing. These fans are used as the ventilation systems in a tunnel for the passengers' comfort and safety. It is used in Road tunnel ventilation, and construction/utility sites.

Dust Collector

We offer customized Dust Collectors for our customers to meet their specific needs and applications. We design the dust collectors to suit the space and operating requirements of the customers. This feature reduces maintenance requirements and lowers operating costs more than traditional units for a cost-effective operation. Cosmos Aircon has a complete range of Dust Collectors which are efficient, rugged, and durable with minimum maintenance requirements. We offer only the highest quality products backed by advanced technology and outstanding technical support generating considerable added value to the customers.

Agriculture Fans

Agriculture Fans are designed to provide adequate air movement and ventilation for optimal environmental conditions in greenhouses.

Fan Filter Unit

A compact cabinet unit that features highly efficient EC centrifugal fans, integrated with high-performance filters to reduce fine particles, bacteria, viruses and supply clean air to the occupant area. Effective Filtration System: Three layers of filters and an additional UV light filter particles up to 0.3 microns. Low Noise: Efficient EC plug fan and filtrations installed in a lightweight and compact cabinet, which is 15% smaller than those available in the market. Energy Saving: Use high-efficiency EC motors that can reduce energy consumption, all without sacrificing performance. Low sound level due to good EC motor efficiency plus a light aluminium impeller ensures a lower power consumption that leads to a reduction in sound levels.

Mixed Flow Fans

These unique mixed flow fans, with aerodynamically designed impeller and vane system, lead air through the impeller in both the axial and the radial directions, developing the desired pressure characteristics similar to centrifugal fans but with an axial air path suitable for straight through installation.

Attenuator

An attenuator is an electronic device that reduces the power of a signal without appreciably distorting its waveform.